Brodit Aktiv Bilholder Sony Ericsson Elm
Aktiv holder med cigg-kontakt (512134)
Skaffetid (få varen raskere mot et tillegg)
5+ på lager hos leverandør
Sendes fra oss 3 dager*
Fleksibel betaling med AfterPay
kr 10.000 over 12 mnd. = 977,- / mnd.
Effektiv rente 35,39%, Totalt kr 11.722,-
With cig-plug and pass-through connector for headset connectivity. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
The active holder charges your battery when it is in the holder. Connects to the vehicle?s cigarette lighter socket, 12/24 Volt.
The active holder also has a pass-through connector so you can attach any cable that fits the mobile to the holder. This means you can use a headset in the same time you are charging your phone! Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
3. Slide the device sideways into the holder until you her / feel it snaps into place.
4. The holder is in place.
Brodit Active Holder, Tilt Swivel