Vennligst vent...
Din handlevogn inneholder
Antall
Pris
Totalt
Slett
TOTALT
Eks. Mva.
0
0
Gå til kassen
Fortsett å handle

Hurtigkasse

Fullfør bestilling din uten å logge inn
Bedriftskunde? Klikk her

Leveringsmetode

Betalingsalternativer

VISA / MasterCard
Faktura
14 dagers kreditt. Få varen hjem før du betaler. Du kan også dele opp betalingen.
Priseksempel: kr.10.000, o/12 mnd., eff. Rente 35,39 %, totalt kr 11.722.

Hurtigkassen

Vi velger det rimeligste fraktalternativet og du kan betale med kort eller faktura. Ønsker du å flere alternativer for frakt og betaling, klikk på Gå til kassen. Du vil her også kunne velge 'Forskudd' for å slippe å betale adm./ekspedisjonsbegyr.

Fullfør bestilling
Ikke registrert? Registrer deg | Glemt passordet?
Varenr.: BFC-PRO-300-WWXKW-RP

BitFenix Prodigy Tårn Mini ITX Ingen strømforsyning Hvid

BFC-PRO-300-WWXKW-RP

Pris
Skaffetid (få varen raskere mot et tillegg)
1 314,-
Normal
Best.vare*
 
Hurtig
Ekspress
 
Bestillingsvare
Sendes fra oss Best.vare*
 
 
 
Fleksibel betaling med AfterPay
kr 10.000 over 12 mnd. = 977,- / mnd.
Effektiv rente 35,39%, Totalt kr 11.722,-
 
Ikke vurdert

Beskrivelse

Teksten under er automatisk oversatt fra tysk til engelsk, så en del gramatiske feil forekommer:

"Prodigy" is the English word for a child prodigy. No wonder at least is that the small housing took this name. Because obviously the BitFenix housing specialists have thought, right at the start with a bang and present a top-class cube that come true engineering marvel specifically for Mini-ITX at their first case. The most impressive facts of BitFenix prodigy bundled advance: accommodate up to nine flexibly arranged drives, fan slots for fans between 120 and 230 mm size, mounting possibility for a 240-radiator and the possibility of excessively long graphics cards.

Also the Prodigy occurs very independently and can break away already this effortlessly from the competition. BitFenix proves to survivor and Raider once more, that one ' translator exactly as good as 'square' (would like to remind to the popular Shinobi as MIDI or big-Tower) and it still goes without always transport with its own identity can. This is done inter alia through the in-house surface material SofTouch which is used here at the front as well as on top and bottom of cuboidal case body. The local establishment or substructure serves visually the curvature (in the truest sense of the word) and technically at the same time as carrying handles or entkoppelnde stand elements.

At the latest, this transport system predestinated the compact and seven kilos light prodigy as a LAN-housing. Under the SofTouch area of send sheets BitFenix deploys a material called "FyberFlex", which is very stable, on the other hand but slightly elastic, which is why the arches are far durchdrückbar, without break or bend. The actual body of prodigy, however, consists of white coloured steel, which dominated in the Interior of the cube. The Prodigy in the simple elegance of a white SofTouch surface that is covered by a black frame and below a 5, 25-inch Aperture has the black BitFenix logo and above is viewed from the front.

A small, but well sorted I/O-Panel audio/out with two internally can be connected USB 3.0 ports can be found on the right, closed outside. The left side is perforated at height optional verbaubarer components such as video cards or hard drives, however, to give them an additional lateral fresh air source. Fresh air comes from the front but otherwise also abundant, because behind the front incl. filter two blowing a 120 fan be position, a spectre fan is already pre-assembled. Instead there but also a single fan of larger format can work, which cannot exceed even 230 mm in size, which is at least record for Mini-ITX cases!

What front streaming as fresh air is behind and above as exhaust released, where in the heck either the preinstalled 120 - or a 140er-rotor can do service. On the ceiling, place is phenomenal for the Mini-ITX class for two more 120 mm fans that may - be different but even a dual radiator! To facilitate installation, can be very easy to take out the Black mesh section in the lid, give you have then incidentally to an optical drive, because is the 5, 25-inch Bay at the same height. Including sit two separate HDD cages, which rotated to 180 degrees, or completely removed ("FlexCage") and a total five 3.5-(without tools) or 2, can accommodate 5-inch disks.

More SSDs can be upright on a carrier at the right side panel and the partition wall to the Web Part pane screw on themselves, so that theoretically legendary nine small drives come under. The power supply gets back below assigned its own housing section so - thermally cheap – and should be installed ideally with the fan down on four rubber surveys, where a grille area and a removable dust filter provide cold air and cleanliness. The suspended ceiling of the PSU has large openings to wiring harnesses for the motherboard supply through Guide, as the Mini-ITX board is bolted directly about lying.

This has the advantage that even the highest Tower cooler freely in the amount can rise, located directly in the airflow of the tail rotor and can suck in fresh air from the side air intake fan of an edgewise inserted graphics card. If there is at height of VGA a hard disk inside the HDD cage, about 16.5 cm long can be the pixel Accelerator, this is not the case and you may completely dispenses with the upper HDD cage, its maximum dimensions are whopping 31 cm. The realization of a high end system in close proximity is so easy and the Prodigy almost invites.

Note: The built-in hardware components on some images are for illustrative purposes only and are not included.



Technical details:
  • Dimensions: 250 x 404 x 359 mm (B x H x T)
  • Material: Steel, FyberFlex, SofTouch
  • Weight: 7 kg
  • Colour: Black white,
  • Form factor: Mini ITX
  • Fan a total possible:
    1 x 230/200/180/140 mm or 2 x 120 mm (front)
    1 x 140/120 mm (back)
    2 x 120 mm (cover)
  • It installed:
    1 x 120 mm (front)
    1 x 120 mm (back)
  • Filter: power supply, front
  • Drive bays:
    1 x 5.25 inches (external)
    5 x 3.5 inches (internally, without tools)
    9 x 2.5 inch (intern, 5 x instead of 5 x 3.5 inches)
  • Power supply: 1 x standard ATX (optional; max. 160 mm length)
  • Expansion slots: 2
  • I/O Panel:
    2 x USB 3.0 (internal connection)
    1 x for each audio in / out
  • Maximum length of the graphics card (with HDD cage): 165 mm
  • Maximum graphics card length (without HDD cage): 310 mm
  • Distance Mainboardtray/network part cage to the cover (without lid fan): approx. 200 mm

Andre kunder kjøpte også

269,-
Legg varen i handlekurven
Corsair Air series SP120 Quiet edition Twin pack
394,-
Legg varen i handlekurven
Noctua NF-A14 PWM Indsats med blæser
998,-
Legg varen i handlekurven
Corsair "WAK Cooling Hydro Series H90 Watercooling"
961,-
Legg varen i handlekurven
Chieftec Industrial Chieftec A-80 550W 85+ ATX 12V 2.3,12cm Fan, Modular
1 010,-
Legg varen i handlekurven
Corsair Builder Series CX600 V2 600Watt
149,-
Legg varen i handlekurven
Corsair Air series AF120 High Airflow
869,-
Legg varen i handlekurven
Corsair "DDR3 8GB PC 1600 CL9 KIT (2x4GB) Vengeance blue retail"
2 583,-
Legg varen i handlekurven
INTEL CORE I5-3475S 2.90GHZ
2 945,-
Legg varen i handlekurven
Intel CPU Core I5-4670 3.4GHz Quad-Core LGA1150

 

 

Bli kvitt miljøfarlig avfall! Levér inn dine kasserte elektriske og elektroniske produkter her! Det er enkelt, gratis og miljøvennlig. Du finner mer informasjon om ordningen på www.elretur.no.