Noctua "Kühler NH-D14 775/1156/1366/AM2/AM2+/AM3 retail"
Skaffetid (få varen raskere mot et tillegg)
5+ på lager hos leverandør
Sendes fra oss 6-8 dager*
Fleksibel betaling med AfterPay
kr 10.000 over 12 mnd. = 977,- / mnd.
Effektiv rente 35,39%, Totalt kr 11.722,-
Teksten under er automatisk oversatt fra tysk til engelsk, så en del gramatiske feil forekommer:
Knieet low and pays your respect the King of air coolers!
Long time it was comparable still Noctua, regarding the publication of new CPU cooler to the high end manufacturers originating in Austria. Although the successful models have been adapted to the new base requirements, but the cooler design remained the same. This was still hardly detrimental to the popularity of the brand, finally put the CPU cooler and self-developed fan records the processing quality, reliability and low noise emission.
Now, Noctua is back with a bang. While meeting the above mentioned virtues are all also in the new top model, the cooling performance is significantly higher and set new record for air coolers. NH-D14 is simply named the creation. The number reveals this already an important feature: the 14 stands for the use of a large 140 mm fan, which has a better ratio of displacement to volume. A fan was however not enough and so ruining the engineers from the Alpine Republic still a 120 to.
While the previous Noctua CPU cooler with a simple cooling tower came from, has the D14 equal to two of them. Adequately to provide the number of heatpipes from four to six rose. The heat sink are however very large compared to other Twin-Tower structures. In the aggregate with two mounted fans, the Noctua that is extremely handsome.
However, the Noctua engineers made it, barely increasing the height than the 120 models. With 160 mm of the NH-D14 therefore demands only medium-sized to the width of the housing. This is achieved with a particularly low mounting position of the 140er fan. This offers the advantage of better ventilation and cooling the surrounding heat sources such as converters and memory at the same time.
While the 140er fan between the two cooling towers sits, is assembled of 120 on the outside. Both fans combine a huge funding volume with a low noise. In addition, a voltage adapter in the form of a cable are attached for every fan. This speed and reduce this volume again, resulting in minimal 13.2 and 12.6 dB(A). Here the clear superiority of 140ers proves as yet enormous 92 m³/h are promoted.
During processing, there is no cause for the reproach - Noctua here once again sets the standard. As usual, soldered the connections of heatpipes and fins and the plates on the edges in addition braces. This guarantees maximum durability. A nickel layer covers the NH-D14 and protects the cooling body from oxidation. At the same time, the use of heat-conducting pastes, liquid metal-based poses no problem.
The proven SecuFirm2 mounting system guarantees optimal contact pressure and maximum security by the reliable connection of the cooler with the mounting plate on the rear side of the mainboard. At the same time, it offers a high level of compatibility to all current sockets of Intel (775, 1155, 1156, 1366) and AMD (AM2, AM2 +, AM3, AM3 +, FM1). A not included backplate is required for AMD systems! It is installed but mostly from the factory. The NT-H1 thermal compound is included also.
About the optional mounting kit (CPNA-024 in our range), the cooler with the Intel socket LGA 2011 is compatible.
Andre kunder kjøpte også