Cooler Master Elite 120 Advanced Ultralille formfaktor Mini ITX Ingen Sort
Skaffetid (få varen raskere mot et tillegg)
5+ på lager hos leverandør
Sendes fra oss 4-6 dager*
Fleksibel betaling med AfterPay
kr 10.000 over 12 mnd. = 977,- / mnd.
Effektiv rente 35,39%, Totalt kr 11.722,-
Teksten under er automatisk oversatt fra tysk til engelsk, så en del gramatiske feil forekommer:
The Division of Mini-ITX has been dealt with so far rather neglected by cooler master. But this change 120 advanced now suddenly with the elite. An optical treat with real high end features and extremely high-quality processing. This jewel of a powerful Mini-PC, such as for the living room, can be with super ventilation created, which will attract many neidische attention.
The dimensions of the case are designed so that real pixel Monster (up to a length of 34.3 cm) like an NVIDIA GeForce GTX 690 find a nice place. To incorporate a such powerful VGA card, speaks excellent ventilation of the "little ones". A 120 mm fan is already ex works in the front, with 19 dB(A) also pleasantly quiet. As he carries out his service right in front of the hard drive cage, take advantage of the produced air flow also the HDDs or SSDs.
Also on the drive cage can be mounted a further 120 inside, reinforced the airflow. Also, cooler master on a specially built frame on the right side has a 80 mm fan (2,000 rpm, installed 20 dB(A)) in low-profile design, the mainboard and Graka helps to cool temperatures and still no space problems.) So that the fan can suck in enough air, ventilation grilles in the case are embedded everywhere.
The front optics of elite 120 is characterised by grey brushed aluminum, which gives a very significant impression. Clean and stylish. The black I/O Panel on the right and left sides with power switch, reset button, as well as two USB 2.0 and a USB 3.0 port (internal connection) and the audio connectors built clean. As mentioned, the two surfaces have grille, which optimize the ventilation.
The Interior is very thoughtfully built to take maximum advantage of the existing space. Up to four 2.5-inch hard drives can be installed in the HDD cage. This is below the optical 5, 25-inch drive (not a slim drive needed!) and can in addition to the SSDs also up to three record 3, 2.5 inch drives. Thus, even a powerful combination of several fast SSDs and large hard drives is possible. The 2, 5-inch drives are screwed on supplied Rails on the bottom and top. The 3, 5-inch drives, however, be without tools and decoupled pushed on Rails into the bays.
The rear room is taken up almost entirely by the Mini-ITX board and the optional standard ATX power supply. For CPU coolers are 65 mm height available. Because the power supply is mounted directly on the radiator, should be ensured on the basis of this comes along in low-profile format. The left side of the housing is completely reserved for the graphics card, so virtually the entire inside length (up to 343 mm) available. Two slots for the expansion card allow the use of dual-slot graphics cards. A hose implementation can be used for external WaKüs.
Technical details (housing):
Andre kunder kjøpte også