Vennligst vent...
Din handlevogn inneholder
Antall
Pris
Totalt
Slett
TOTALT
Eks. Mva.
0
0
Gå til kassen
Fortsett å handle

Hurtigkasse

Fullfør bestilling din uten å logge inn
Bedriftskunde? Klikk her

Leveringsmetode

Betalingsalternativer

VISA / MasterCard
Faktura
14 dagers kreditt. Få varen hjem før du betaler. Du kan også dele opp betalingen.
Priseksempel: kr.10.000, o/12 mnd., eff. Rente 35,39 %, totalt kr 11.722.

Hurtigkassen

Vi velger det rimeligste fraktalternativet og du kan betale med kort eller faktura. Ønsker du å flere alternativer for frakt og betaling, klikk på Gå til kassen. Du vil her også kunne velge 'Forskudd' for å slippe å betale adm./ekspedisjonsbegyr.

Fullfør bestilling
Ikke registrert? Registrer deg | Glemt passordet?
Varenr.: RM125

Revoltec " Kaltlichtkathode grün Twin-Set"

RM125

Pris
Skaffetid (få varen raskere mot et tillegg)
162,-
Normal
2-4 dager*
 
Hurtig
Ekspress
3 dager*
+ 750,-
 
4 stk på lager hos leverandør
Sendes fra oss 2-4 dager*
 
 
 
Fleksibel betaling med AfterPay
kr 10.000 over 12 mnd. = 977,- / mnd.
Effektiv rente 35,39%, Totalt kr 11.722,-
 
Ikke vurdert

Beskrivelse

Teksten under er automatisk oversatt fra tysk til engelsk, så en del gramatiske feil forekommer:

What could be better there than a cold cathode of light? Right! Two cold light filaments! Because a case with window alone not sufficient usually still to optimally present the innards of a PC. Even if you can just see some of the carefully assembled components with good room lighting, the effect is better, but still a few steps when it illuminated the hardware with a stylish cold light of cathode. Or just two...

In contrast to ordinary neon tubes, cold-cathode light have a far longer service life - they work extremely reliably up to 20 years! Also offer a brighter light than neon tubes light cold-cathode and not warm up and therefore are the best choice, if you finished the Interior of the computer with special components out accordingly will put out in scene.

Revoltec this product contains two 30 cm long filaments with green light. The diameter of the tubes is approximately 1 cm. The cable of the cathode placed more individually on a small black box, the inverter (inverter). This is the DC of power supply to AC power to which need the cathode.

Of the inverter itself, a cable goes off to a bracket which is attached in the rear of the PC housing. To a switch is installed, which is the lighting once and can be switched off. Out of aperture, the direct connection to the power supply is made with a cable with 4-pole Molex connector is used.

Attaching filaments and inverter in the case via the enclosed pads which are self-adhesive on one side and on the other have a Velcro surface. Thus can light converter at any time Velcro declined and for example with other color variants.

Technical details:
  • Dimensions: 313 x 15 x 15 mm (B x H x T)
  • Diameter: approx. 10 mm
  • Light: Green
  • Connector: 4-pin Molex
  • Power consumption: approx. 3 W
  • Scope of delivery:
    2 x cold light cathode
    Inverter (inverter)
    Slot plate with on / off switch incl. screw
    Velcro pads with adhesive back

 

 

Bli kvitt miljøfarlig avfall! Levér inn dine kasserte elektriske og elektroniske produkter her! Det er enkelt, gratis og miljøvennlig. Du finner mer informasjon om ordningen på www.elretur.no.