ARCTIC Freezer XTREME Rev.2 Processor-køler
Skaffetid (få varen raskere mot et tillegg)
5+ på lager hos leverandør
Sendes fra oss 3-5 dager*
Vi har den beste prisen på denne varen i følge prisjakt.no.
Fleksibel betaling med AfterPay
kr 10.000 over 12 mnd. = 977,- / mnd.
Effektiv rente 35,39%, Totalt kr 11.722,-
Teksten under er automatisk oversatt fra tysk til engelsk, så en del gramatiske feil forekommer:
The CPU cooler from Arctic Cooling combine two aspects: they are extremely quiet and inexpensive. Particularly when silent fans without overclocking ambitions, they are therefore extremely popular. But they are also used as silent replacement of the often irritating loud boxed cooler numerous.
Therefore, the freezer Xtreme occupied a special position in Arctic cooling. Because this model wants to be not only quiet, but appealing at the same time also very power hungry users. So that leaves the Xtreme although the usual price of the manufacturer, offers but still a very good price performance ratio for this category. What also distinguishes it from the competition, is its extremely high compatibility, all current socket including - including Intel Core i5 and i7 (1156 and 1366) CPUs and AMD's AM2, AM2 + and AM3 processors.
To realize the goal of a significantly higher cooling performance, the usual construction paths were left and implemented a powerful Tower construction with heat pipes. The heat pipes consist of copper as the base plate and thus allow an excellent Wärmeleitfähikeit. The two opposite parts of the heatsink consists of 102 aluminium fins and are powered by four Doppelheatpipes. This allows a maximum cooling performance of excellent 160 watts.
Between the two cooling towers, a 120 mm fan works. This has a special frame with round shape, and can be built therefore particularly deep sitting, without interfering with the fastening frame. This in turn allows an overall compact design – 131 mm height is very low for a heatpipe tower with 120 fan. This brings in housing benefit from this quiet cars, which have only a limited width and height for the cooler, thus and could take only learners cooler with 92 mm fan.
With a 4-pin PWM connector can fan are controlled, for example, directly from the motherboard and up 1,500 rpm governing speed in the range of 800. With 0.5 sone maximum volume is the fan even under full load very quietly.
The black plastic covers on the sides are particularly striking. They serve on the one hand as a decorative element and give a distinctive look to the cooler. At the same time, they have also a practical benefit. By they specifically direct the airflow through the slats, they prevent that this side escapes and is therefore not used for cooling.
The fan from the cooler must be included for mounting. Intel is installed on connector with the retention module on AMD by clips. In addition, thermal paste is not needed because a thin layer of MX-2 is already plotted on the bottom.
Andre kunder kjøpte også